Right Click on the Thumbnail of your DIY Memorial Picture and click "Save Target As".

In the "Save As" dialog box that comes up, navigate to the folder you would like to save your DIY Memorial Picture to. You can just save it on the "Desktop" if you like and move it later.

After printing out your DIY Memorial Picture (follow instructions for your own printer), allow it to dry completely. Be sure to handle picture by the edges and make sure all surfaces are dry and clean.

Place picture on a clean dry cutting board and very carefully use a safety razor blade or razor blade knife to cut a hole in the picture where indicated. Please be careful with the razor blade. It takes some practice and a steady hand (you can practice on a blank piece of paper or better yet, an old piece of photo paper). And don't worry...if you mess it up the first time, you can always print out another one.

Place your loved ones picture behind you DIY Memorial Picture and tape it into  position remembering to avoid any dirt or moisture.

Now all you need is a suitable frame to mount your DIY Memorial Picture.

I prefer the largest matted frame I can find - matted with and 8x10 opening.

I hope your picture brings you and your family some comfort in your time of loss.

Thank you for ordering and God bless you.